Official STIHL Importer
Selection Petrol chainsaws for forestry

MS 441 C-M

STIHL's most advanced pro chainsaw ever!

General

MS 441 C-M
MS 441 C-M

STIHL's most advanced pro chainsaw ever! The MS 441 C-M features STIHL M-Tronic, a fully electronic controlled ignition timing and fuel metering system. This modern, low vibration and high performance saw is simple to start and operate by automatically adjusting to the conditions you are working in. The M-Tronic system even remembers your settings from the last time you used the tool for quick and easy use. Optimised power to weight ratio. Very low vibration levels. Up to 20% less fuel consumption and 50% fewer emissions compared to conventional two-stroke engines without 2-MIX technology.

Versions



The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Product variations

  • MS 441 High power, low vibration professional chainsaw.
  • MS 441 C-M STIHL's most advanced pro chainsaw ever!

Technical data

MS 441 C-M

Technical data

Technical data Value
Displacement cm³ 70,7
Power output kW/bhp 4,2/5,7
Weight kg 1) 6,6
Power-to-weight ratio kg/kW 1,6
Sound pressure level dB(A) 2) 105
Sound power level dB(A) 2) 118
Vibration level left/right m/s² 3) 3,1/3,3
STIHL Oilomatic saw chain type 3/8" RS
Recommended bar length cm/inch 50cm/20"

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 441 C-M

Standard features

  • STIHL M-Tronic (FT) Zoom
    STIHL M-Tronic (FT)

    For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • HD2 filter Zoom
    HD2 filter

    This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to its special material, the filter can easily be cleaned by washing, for example with STIHL Varioclean and warm water.

  • Advanced combustion technology Zoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Controlled-delivery oil pump Zoom
    Controlled-delivery oil pump

    Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Decompression valve Zoom
    Decompression valve

    The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Side-mounted chain tensioning Zoom
    Side-mounted chain tensioning

    Side-mounted chain tensioning makes it easy to tension the chain safely.

  • Combi lever Zoom
    Combi lever

    As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Accessories

MS 441 C-M

Accessories

    • 2-in-1 file holder Zoom
      2-in-1 file holder

      Practical tool for quickly sharpening the teeth and depth gauge in a single step. Ideal for occasional users. For 1/4" P, 3/8" P, .325", 3/8" and .404" saw chains, integrated file tolerance compensation (only from STIHL).

    Versions

    • HP Super two-stroke engine oil Zoom
      HP Super two-stroke engine oil

      Semi-synthetic oil with low-ash additives for clean low-smoke burning. 'Low-smoke oil' performance class: JASO-FD, ISO-L-EGD. Fuel/oil ratio: 50:1. Particularly recommended for STIHL 4-MIX engines.

    Versions

    • ADVANCE GTX trekking chainsaw boots Zoom
      ADVANCE GTX trekking chainsaw boots

      Special profile sole with very good grip. High quality, water-repellent suede. With breathable and waterproof GORE-TEX® membrane. Additional water and wear protection provided by high-rise rubber edge. Highly absorbent, removable inner sole. Suitable for demanding, professional chainsaw users on hillsides and for tree maintenance. EN ISO 17249, cut resistance Class 2 (= 24 m/s).

    Technical data Value
    Leg height 20 cm
    Weight 1) 2,5 kg
    Cut protection class Class 2
    Size 39 - 47

    1) Approx per pair, using size 42

    Versions

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Dokumente

Gebrauchsanleitungen

Languages Date Link
manual icon en 14/11/2018
Download PDF
Download PDF