Selection Petrol powerful brushcutters

FS 70 C-E

FS 70 C-E petrol-driven brushcutter: Easy mowing of larger green areas

General

Extremely robust 0.9 kW brushcutter with bike handle and 2-MIX engine. Simplified starting procedure. Increased starting comfort with ErgoStart. Up to 20% lower fuel consumption and 70% reduction in exhaust emissions compared to conventional two-stroke engines without 2-MIX technology. 4-bladed grass-cutting blade for mowing large areas of tough grass. Also suitable for thinner bushes or reeds.

Versions

FS 70 C-E Motorsense

Save and compare

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Product variations

FS 70 RC-E FS 70 RC-E petrol-driven brushcutter: robust and comfortable

Personal Protective Equipment

Personal Protective Equipment
Personal Protective Equipment
Using STIHL grass trimmers and brushcutters

Using STIHL grass trimmers and brushcutters
Using STIHL grass trimmers and brushcutters

Technical data

Technical data

Technical data	Value
Displacement cm³	27,2
Displacement cu-in	1,66
Power output kW	1
Power output PS	1,2
Power output bhp	1,2
Weight kg ¹⁾	5,4
Sound pressure level dB(A) ²⁾	94
Sound pressure level dB(A) ²⁾	94
Sound power level dB(A) ²⁾	108
Cutting tool	Grass cutting blade 230-2
Vibration level left m/s² ³⁾	7
Vibration level right m/s² ³⁾	5,5
Vibration level left with metal tool m/s² ³⁾	6,6
Vibration level right with metal tool m/s² ³⁾	6,6
Total length cm ⁴⁾	170
Cutting circle diameter mm	420

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Personal Protective Equipment

Personal Protective Equipment
Personal Protective Equipment
Using STIHL grass trimmers and brushcutters

Using STIHL grass trimmers and brushcutters
Using STIHL grass trimmers and brushcutters

Features

Standard features

Multi-function control handle

Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
ERGONOMIC BIKE HANDLE

EFFORTLESS MOWING OF LARGE AREAS. The ergonomic bike handle helps you mow large areas quickly and effortlessly, as this handle supports a natural brushcutter movement. The bike handle is easy to adjust and secure.
STIHL ErgoStart (FT)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
STOP BUTTON

RESTART WORK QUICKLY. With the stop button, you can switch off your power tool quickly and easily for a short break, for example. As the button springs back to its original position after actuation, the engine is immediately ready to start again. This provides more comfort after breaks and increases your work efficiency.
STIHL 2-MIX-Engine

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Multi-function control handle

Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Basic harness

For use with loop handle machines.
Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.