Official STIHL Importer
Selection Petrol lightweight grass trimmers and brushcutters

FS 50 C-E

FS 50 petrol brushcutter: powerful and easy to use

General

FS 50 C-E

New generation light ergonomic brushcutter with STIHL ErgoStart for easy jerk free starting. Ideal for tackling grassy areas around the garden or at the allotment. Modern appearance, convenient operation and very simple starting procedure are the highlights of the new generation STIHL grass trimmer range. The number of steps needed to start the machine has been drastically reduced. The frustration of a flooded engine is virtually eliminated. New 2-stroke engine with stratified charge allows fast acceleration, low emissions, reduced fuel consumption. With bent shaft, loop handle and AutoCut mowing head ideally for trimming small areas of grass and around obstacles. Ideal for edging as well as for small areas of grass. The loop handle can easily be adjusted for comfortable operation without the use of tools. Also available without STIHL ErgoStart easy-start system (FS 50).

Versions



The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Product variations

  • FS 50 FS 50 petrol brushcutter: powerful and easy to use

Technical data

FS 50 C-E

Technical data

Technical data Value
Displacement cu-in 1,66
Displacement cm³ 27,2
Power output PS 1,1
Power output kW 0,8
Weight kg 1) 4,5
Sound pressure level with plastic tool dB(A) 2) 93
Sound power level dB(A) 2) 108
Vibration level, right with plastic tool m/s² 3) 5,7
Vibration level, left with plastic tool m/s² 3) 6
Total length cm 4) 145
Sound pressure level with metal tool dB(A) 2) 97
Cutting tool AutoCut C6-2
Cutting tool AutoCut mowing head C 5-2
Cutting diameter mm 420
Performance Um 1,1

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

FS 50 C-E

Standard features

  • STIHL ErgoStart (FT) Zoom
    STIHL ErgoStart (FT)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Accessories

FS 50 C-E

Accessories

    • Set of plastic blades Zoom
      Set of plastic blades

      For PolyCut, twelve plastic blades.

    Versions

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Dokumente

Gebrauchsanleitungen

Languages Date Link
manual icon en 07/11/2022
Download PDF 1,3 MB
Download PDF 1,3 MB