Official STIHL Importer
Selection Petrol clearing saws

FS 360 C-E

1.7kW clearing saw with ErgoStart (E)

General

FS 360 C-E

For mowing tough grass. STIHL 4-point anti-vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, 2-MIX engine.

Versions



The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

FS 360 C-E

Technical data

Technical data Value
Displacement cu-in 2,3
Displacement cm³ 37,7
Power output kW 1,7
Performance Um 2,3
Power output PS 2,3
Weight Pounds 1) 18,7
Weight kg 1) 8,5
Sound pressure level with plastic tool dB(A) 2) 99
Sound pressure level with metal tool dB(A) 2) 98
Sound power level with metal tool dB(A) 2) 110
Sound power level dB(A) 2) 112
Vibration level, left with plastic tool m/s² 3) 2,5
Vibration level, left with metal tool m/s² 3) 2,2
Vibration level, right with metal tool m/s² 3) 1,8
Vibration level, right with plastic tool m/s² 3) 2
Total length cm 4) 179
Cutting tool Brush knife 300-3
Cutting diameter mm 480
Fuel tank capacity oz 25,4
Tank volume l 0,75
Speed at maximum power Um 8.500

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

FS 360 C-E

Standard features

  • Bike handle Zoom
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Winter setting slide control Zoom
    Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Locking plug-in bolt Zoom
    Locking plug-in bolt

    Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)

  • Large fuel tank Zoom
    Large fuel tank

    The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Air filter with long service life Zoom
    Air filter with long service life

    The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)

  • STIHL ErgoStart (FT) Zoom
    STIHL ErgoStart (FT)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • STIHL 4-point anti-vibration system Zoom
    STIHL 4-point anti-vibration system

    In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)

  • Tool free handle adjustment Zoom
    Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Accessories

FS 360 C-E

Accessories

    • HP Super two-stroke engine oil Zoom
      HP Super two-stroke engine oil

      Semi-synthetic oil with low-ash additives for clean low-smoke burning. 'Low-smoke oil' performance class: JASO-FD, ISO-L-EGD. Fuel/oil ratio: 50:1. Particularly recommended for STIHL 4-MIX engines.

    Versions

    • Set of plastic blades Zoom
      Set of plastic blades

      For PolyCut, twelve plastic blades.

    Versions

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.