Official STIHL Importer
Selection Petrol chainsaws for forestry

MS 150 C-E

STIHL's smallest and lightest saw

General

Extending the STIHL saw range with our smallest and lightest saw, the MS 150 C-E is designed to meet the needs of professionals carrying out light snedding, reducing smaller limbs ready for chipping, pruning fruit trees or just cutting smaller branches or producing firewood. With its light weight, high cutting power and very fine surface cut, the narrow cutting attachment has been developed specially to provide high performance in this power class.

Versions



The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Product variations

Technical data

MS 150 C-E

Technical data

Technical data Value
Displacement cm³ 23,6
Power output kW/bhp 1/1,3
Weight kg 1) 2,8
Power-to-weight ratio kg/kW 2,8
Sound pressure level dB(A) 2) 97
Sound power level dB(A) 2) 110
Vibration level left/right m/s² 3) 4,9/4,9
STIHL Oilomatic saw chain type 1/4" P PM3
Recommended bar length cm/inch 30cm/12"

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 150 C-E

Standard features

  • STIHL ERGOSTART Zoom
    STIHL ERGOSTART

    A spring between the starter cord reel and crankshaft relieves the strain when starting, meaning that excessive pulling on the cord is no longer needed. The result is a convenient starting procedure with practically.

  • Service-friendly air filter system Zoom
    Service-friendly air filter system

    The carburetor can be accessed without tools, so you can clean the air filter in a single step.

  • Advanced combustion technology Zoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • Side-mounted chain tensioning Zoom
    Side-mounted chain tensioning

    Side-mounted chain tensioning makes it easy to tension the chain safely.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Dokumente

Gebrauchsanleitungen

Languages Date Link
manual icon en 11/01/2017