FS 70 RC-E
Robust 0.9 kW petrol brushcutter with ErgoStart and loop handle
Extremely robust 0.9 kW petrol brushcutter with loop handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.
FS 70 RC-E€612.00 *
* Manufacturer's recommended retail price updated as of 2018. The manufacturer's recommended retail prices are subject to change without notice.
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
- FS 70 C-E Robust 0.9 kW petrol brushcutter with ErgoStart and bike handle
|Power output kW/bhp||0,9/1,2|
|Weight kg 1)||4,8|
|Sound pressure level dB(A) 2)||95,0|
|Sound power level dB(A) 2)||107,0|
|Vibration level left/right with plastic tool m/s² 3)||7,8/6,0|
|Total length m 4)||1,7|
|Cutting tool||AutoCut C 25-2|
|Tank volume l||0,34|
|Vibration level left/right with metal tool m/s² 3)||6,6/6,6|
1) Weight excluding fuel, cutting tool and guard
2) Power factor according to DIR2006/42/EC=2.5(dB(A))
3) (K) factor according to Dir. 2006/42/EC = 2m/s²
4) Without cutting tool
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Loop handle (R)
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.