Official STIHL Importer
Selection Petrol clearing saws

FS 560 C-EM

Top of the range 2-MIX clearing saw with M-Tronic (M) and ErgoStart (E)

General

FS 560 C-EM Sawing

Top of the range with extraordinary power and robust design. The FS 560 C-EM clearing saw with STIHL M-Tronic and ErgoStart is a sound choice for professionals. Low vibration levels due to the four-point anti-vibration system. With simple start logic, stop button and fully electronic M-Tronic engine management as standard Mow version with brush knife.

Versions

Price

* Manufacturer's recommended retail price updated as of 2018. The manufacturer's recommended retail prices are subject to change without notice.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

FS 560 C-EM Sawing

Technical data

Displacement cu-in 3,48
Displacement cm³ 57,1
Power output kW 2,8
Performance Um 3,8
Power output PS 3,8
Weight Pounds 1) 22,5
Weight kg 1) 10,2
Sound pressure level with plastic tool dB(A) 2) 101
Sound pressure level with metal tool dB(A) 2) 104
Sound power level with metal tool dB(A) 2) 117
Sound power level dB(A) 2) 117
Vibration level, left with plastic tool m/s² 3) 3,7
Vibration level, left with metal tool m/s² 3) 3,3
Vibration level, right with metal tool m/s² 3) 3,3
Vibration level, right with plastic tool m/s² 3) 3,7
Total length cm 4) 176
Cutting tool Brush knife 350-3
Cutting diameter mm 480
Fuel tank capacity oz 33,5
Tank volume l 0,99
Speed at maximum power Um 9.500

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

FS 560 C-EM Sawing

Standard features

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • STIHL M-Tronic Zoom
    STIHL M-Tronic

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • STIHL ErgoStart (E) Zoom
    STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • ADVANCE PLUS Universal harness Zoom
    ADVANCE PLUS Universal harness

    With a comfort carry ring for quickly attaching an removing the clearing saw.

  • STIHL 4-point anti-vibration system Zoom
    STIHL 4-point anti-vibration system

    In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Bike handle Zoom
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • Tool free handle adjustment Zoom
    Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Start flap lever (M-Tronic) Zoom
    Start flap lever (M-Tronic)

    With the M-Tronic, you do not have to worry about cold or warm start. With M-Tronic there is only one starting position on the start flap lever. The system detects cold or warm start automatically and electronically calculates the exact amount of fuel. You can start with fewer starting strokes and can apply full throttle immediately. If you press the throttle trigger the start rotary switch will automatically return to the operating position. (similar to illustration)

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Winter setting slide control Zoom
    Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Locking plug-in bolt Zoom
    Locking plug-in bolt

    Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)

  • Large fuel tank Zoom
    Large fuel tank

    The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Air filter with long service life Zoom
    Air filter with long service life

    The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)

Additional features

  • ADVANCE forestry harness Zoom
    ADVANCE forestry harness

    Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.

We present some Product Technology features in product technology .

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Accessories

FS 560 C-EM Sawing

Accessories

    • HP Super two-stroke engine oil Zoom
      HP Super two-stroke engine oil

      Semi-synthetic oil with low-ash additives for clean low-smoke burning. 'Low-smoke oil' performance class: JASO-FD, ISO-L-EGD. Fuel/oil ratio: 50:1. Particularly recommended for STIHL 4-MIX engines.

    Versions

    Price

    * Manufacturer's recommended retail price updated as of 2018. The manufacturer's recommended retail prices are subject to change without notice.

    • Set of plastic blades Zoom
      Set of plastic blades

      For PolyCut, twelve plastic blades.

    Versions

    Price

    * Manufacturer's recommended retail price updated as of 2018. The manufacturer's recommended retail prices are subject to change without notice.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Cookies on the STIHL website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on our STIHL website. If you would like to learn more about the usage of cookies please click here.

OK